Installation Rail Kit For Combined Hot & Cold Units With Separate Inlets
Our Installation Rail Kit BPFRAILKIT is suitable for all combined hot & cold units with separate inlets in a hard water area, and comes complete with a carbon block filter, and Brita scale removal filter. Our Post Code Scale Checker will tell you if you are installing in a soft or hard water area.
The BPFRAILKIT Consists Of::
- Short length 15 mm copper tubing, to connect to Equal Tee a 15mm Compression Double Check Valve
- An isolation tap and Pressure Reducing Valve set at 2.5 to 3 bar
- A¼" push-fit reducer and a Water Block (non return valve and safeguards against flooding. (THIS MUST BE INSTALLED VERTICALLY POINTING DOWNWARDS )
This Kit Also Includes:
- A Filter Kit consisting of our re-useable Filter Housing (to avoid plasticwaste) and a Carbon Block Filter Candle which fits into the Filter Housing. The Candle can be recycled with household waste
- A Brita C150 Scale Filter and Brita C 1/4"
For Boilers In Soft Water Areas:
In Soft Water Areas there would be no need for an expensive Scale Removal Filter You can use our standard Installation Rail Kit to connect both inlets. The PFRAILKIT with a Carbon Block Filter Candle.
*The Mains connection must be to a potable drinking water supply. We recommend that the connection is done by a plumber or an installation trained installer