Installation Rail Kit Complete With Carbon Filter

Our Installation Rail Kit PFRAILKITB is suitable for all POU water coolers, irrespective if the cooler is ambient & cold or hot & cold.

The PFRAILKITB Consists Of:

• Short length 15 mm copper tubing, to connect to equal tee a 15mm compression double check valve
• An isolation tap and pressure reducing valve set at 2.5 to 3 bar
• A ¼" push-fit reducer and a water block (non return valve and safeguards against flooding. (THIS MUST BE INSTALLED VERTICALLY POINTING DOWNWARDS )
• A filter kit consisting of our re-useable filter housing (to avoid plastic waste)
• Including a carbon block filter candle which fits into the filter housing. The candle can be recycled with household waste

*The mains connection must be to a potable drinking water supply. We recommend that the connection is done by a plumber or an installation trained installer.

Hot water boilers may need a different installation rail kit. If installed in a soft water area, you can use this PFRAILKITB. If however the installation is in a hard water area you may need our BFRAILKITB, which includes a Brita scale removal filter. Our Post Code Scale Checker will tell you if you are installing in a soft or hard water area.

Installation Rail Kit Complete With Brita Scale Removal Filter

Our Installation Rail Kit BFRAILKITB is suitable for all hot water boilers in a hard water area. Our Post Code Scale Checker will tell you if you are installing in a soft or hard water area.

The BFRAILKITB Consists Of::

• Short length 15 mm copper tubing, to connect to equal tee a 15mm compression double check valve
• An isolation tap and pressure reducing valve set at 2.5 to 3 bar
• A¼" push-fit reducer and a water block (non return valve and safeguards against flooding. (THIS MUST BE INSTALLED VERTICALLY POINTING DOWNWARDS )
• A Brita C150 scale filter and Brita C 1/4"

For Boilers In Soft Water Areas:
In soft water areas there would be no need for an expensive scale removal filter You can use our standard installation rail kit. The PFRAILKITB with a carbon block filter candle.

*The Mains connection must be to a potable drinking water supply. We recommend that the connection is done by a plumber or an installation trained installer

Softwater 1 Installation Includes:

• An installation by our professional installation partners, based on the site survey completed by you at the online checkout. The installer will connect the equipment to the mains water supply and ensure that it meets all legal and industry standard requirements
• The installation includes an installation rail kit (PFRAILKIT) with a carbon block filter (FILTCARHOU) to remove the taste and smell of chlorine in the mains water
• Our installation partners have been selected on their level of professionalism, efficiency & discretion
• Please note: There should be no extra charges, unless the installation requires unplanned additional work not stated on the site survey, in which case the installation company will contact you directly
• Date of installation: Goods will be installed as standard within 7 working days from when you place your order. You will be contacted by the professional installer to arrange installation. (Standard installation excludes outlining areas such as NI/IOM & Highlands where extended installation timings or quotations maybe needed)
• (Installation By Our Professional Installation Partners Cannot Be Carried Out In IM,IV,KW,HS Postcode Areas)

Hardwater 1 Installation Includes:

• An installation by our professional installation partners, based on the site survey completed by you at the online checkout. The installer will connect the equipment to the mains water supply and ensure that it meets all legal and industry standard requirements
• The installation by our professional installation partners includes a boiler installation rail kit (BPFRAILKIT) which includes, a Brita scale removal filter (FILTC150) to connect to the hot water inlet
• Our installation partners have been selected on their level of professionalism, efficiency & discretion
• Please note: There should be no extra charges, unless the installation requires unplanned additional work not stated on the site survey, in which case the installation company will contact you directly
• Date of installation: Goods will be installed as standard within 7 working days from when you place your order. You will be contacted by the professional installer to arrange installation. (Standard installation excludes outlining areas such as NI/IOM & Highlands where extended installation timings or quotations maybe needed)
• (Installation By Our Professional Installation Partners Cannot Be Carried Out In IM,IV,KW,HS Postcode Areas)