Installation Rail Kit Complete With Brita Scale Removal Filter
Our Installation Rail Kit BFRAILKIT is suitable for all Hot Water Boilers in a hard water area. Our Post Code Scale Checker will tell you if you are installing in a soft or hard water area.
The BFRAILKIT Consists Of::
- Short length 15 mm copper tubing, to connect to Equal Tee a 15mm Compression Double Check Valve
- An isolation tap and Pressure Reducing Valve set at 2.5 to 3 bar
- A¼" push-fit reducer and a Water Block (non return valve and safeguards against flooding. (THIS MUST BE INSTALLED VERTICALLY POINTING DOWNWARDS )
- A Brita C150 Scale Filter and Brita C 1/4"
For Boilers In Soft Water Areas:
In Soft Water Areas there would be no need for an expensive Scale Removal Filter You can use our standard Installation Rail Kit. The PFRAILKIT with a Carbon Block Filter Candle.
*The Mains connection must be to a potable drinking water supply. We recommend that the connection is done by a plumber or an installation trained installer